Paradyne 7610, SNMP DSU manual System LEDs, Main Menu → Status → Display LEDs

Monitoring the DSU

To view the LED status screen, follow this menu selection sequence:

Main Menu → Status → Display LEDs

main/status/leds
Device Name:				Model: 7610
		DISPLAY LEDS
	SYSTEM	NETWORK		DTE
OK	ALARM TEST	DM OOS OOF NS	TXD	RXD RTS CTS DTR
			blinking	blinking

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±È±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

ESC for previous menu	MainMenu Exit
R

When viewed via the ATI, the status display screen is updated approximately every 5 seconds. Use Refresh to obtain a current status of all LEDs.

System LEDs

OK:

ON ± DSU is operational.

OFF ± DSU is performing a power-up self-test, has detected a system failure, or there is no power.

ALARM:

ON ± DSU has detected an alarm condition locally or from the network. Refer to the Troubleshooting section in Chapter 8.

TEST:

ON ± Test in progress. Test can be initiated locally, remotely, or from the network. Includes power-up self-test.

6-2 November 1997 7610-A2-GB20-10