Configuration Option Tables

Table A-2. Network Interface Options (4 of 4)

In-Band Framing Alarm

Possible Settings: Enable, Disable

Default Setting: Enable

When an in-band framing condition is detected on the network interface, an ASCII alarm is generated.

HIn-Band Framing Alarm option does not appear when the In-Band Management Channel Rate (bps) is disabled.

Enable ± Generates an ASCII alarm when a in-band framing condition is detected.

Disable ± No ASCII alarm is generated.

NOTE: Additional settings are required to send out an ASCII alarm. Refer to the Alarm Messages section in Chapter 8.

A-8

November 1997

7610-A2-GB20-10

Page 67
Image 67
Paradyne 7610, SNMP DSU manual Table A-2. Network Interface Options 4, In-Band Framing Alarm