MIB Descriptions

Table C-5. Interface Test Group Objects (2 of 2)

Object

Description

Setting/Contents

 

 

 

ifTestStatus

Indicates the test status of

H Set to inUse(2) by an SNMP

(ifTestEntry2)

the interface.

Manager before a test is started.

 

 

H Set to notInUse(1) by the unit when

 

 

the test has completed. Also set to

 

 

notInUse(1) by the unit if the SNMP

 

 

Manager fails to set an ifTestType

 

 

within 5 minutes.

 

 

 

ifTestType

A control variable used to

The following objects use identifiers to

(ifTestEntry 3)

start/stop user-initiated

control tests on the User Data port

 

tests on the interface.

interface:

 

Provides the following

H noTest (0 0) ± Stops the test in

 

capabilities:

 

progress on the interface.

 

H Start/stop user data port

 

H testLoopDTE (ifTestType 2) ± Starts

 

loopback

 

a Local Loopback (DTE) on the

 

 

 

H Start/stop send pattern

interface.

 

on the user data port

H testMon511 (ifTestType4) ± Starts a

 

 

 

H Start/stop the monitor

Monitor 511 test on the interface.

 

test pattern on the user

H testSend511 (ifTestType6) ± Starts a

 

data port

 

Send 511 test on the interface.

 

 

 

 

 

ifTestCode

Contains a code which is

Supports the following values:

(ifTestEntry 5)

more specific about the test

H none (ifTestCode 1) ± No further

 

results.

 

information is available. Used for

 

 

 

 

send pattern/code and loopback tests.

 

 

H inSyncNoBitErrors (ifTestCode 2) ±

 

 

A 511 monitor pattern test has

 

 

synchronized on the pattern and has

 

 

not detected any bit errors.

 

 

H inSyncWithBitErrors

 

 

(ifTestCode 3) ± A 511 monitor pattern

 

 

test has synchronized on the pattern

 

 

and has detected bit errors.

 

 

H notInSync (ifTestCode 4) ± A 511

 

 

monitor test pattern has not

 

 

synchronized on the requested

 

 

pattern.

 

 

 

ifTestOwner

Used by an SNMP

The SNMP Manager sets the object to

(ifTestEntry 6)

Manager to identify the

its IP address when setting ifTestID and

 

current owner of the test for

ifTestStatus.

 

the interface.

 

 

 

 

7610-A2-GB20-10

November 1997

C-9

Page 102
Image 102
Paradyne SNMP DSU, 7610 manual IfTestEntry2, InSyncNoBitErrors ifTestCode 2 ±, InSyncWithBitErrors