Paradyne 7610 Table A-12. Snmp Traps Options 2, Enterprise Specific Traps, Link Trap Interfaces

Configuration Option Tables

Table A-12. SNMP Traps Options (2 of 2)

General Traps

Possible Settings: Disable, Warm, AuthFail, Both

Default Setting: Both

Determines which SNMP traps are sent to each trap manager.

Disable ± No general trap messages are sent.

Warm ± Sends trap message for ªwarmStartº.

AuthFail ± Sends trap message for ªauthenticationFailureº.

Both ± Sends both trap messages.

NOTE: Refer to Standards Compliance for SNMP Traps, Appendix D.

Enterprise Specific Traps

Possible Settings: Enable, Disable

Default Setting: Disable

This option is used to determine if SNMP traps are generated for enterprise-specific events.

Enable ± SNMP traps are generated for enterprise-specific events.

NOTE: Refer to the Traps: Enterprise Specific section of Appendix D.

Disable ± No enterprise-specific event traps are sent.

Link Traps

Possible Settings: Disable, Up, Down, Both

Default Setting: Both

This option is used to determine if SNMP traps are generated for link up and link down for one of the communication interfaces.

Disable ± No linkUp or linkDown SNMP traps are generated.

Up ± A linkUp trap is generated when the DSU recognizes that one of the communication interfaces is operational.

Down ± A linkDown trap is generated when the DSU recognizes a failure in one of the communication interfaces.

Both ± Sends trap messages for detection of both linkUp and linkDown.

NOTE: Refer to the Traps: linkUp and linkDown section of Appendix D.

Link Trap Interfaces

Possible Settings: Network, Port, Both

Default Setting: Both

This option determines if the SNMP linkUp, SNMP linkDown, and interface-related enterprise-specific traps are generated for the DDS Network Interface and/or User Data (DTE) port.

NOTE: These traps are not supported on the Management port and Terminal port.

Network ± SNMP trap messages are generated for the DDS network interface.

Port ± SNMP trap messages are generated for the User Data (DTE) port.

Both ± SNMP trap messages are generated on both the DDS network interface and the User Date (DTE) port.

A-28 November 1997 7610-A2-GB20-10