Paradyne 7610, SNMP DSU manual Device Messages 1 What Message Indicates What To Do

Messages and Troubleshooting

Device Messages

The Device Messages in Table 8-1, listed in alphabetical order, may appear in the messages area at the bottom of the ATI screens.

Table 8-1. Device Messages (1 of 2)

Device Message	What Message Indicates	What To Do
Blank Entries	New had been selected	H No action needed.
Removed	from the Administer Logins	H Reenter the Login ID,
	screen, no entry was made,
		Password, and Access Level.
	and Save was selected.
Command Complete	Action requested has	No action needed.
	successfully completed.
Invalid Character ( x ) 1	A nonprintable ASCII	Reenter information using valid
	character has been	characters.
	entered.
Invalid ± Network	Network-initiated loopback	No action needed.
Initiated CSU (or DSU)	was in progress when
Loopback Active	another selection was
	made.

Invalid Password

Login is required and an incorrect password was entered; access is denied.

HTry again.

HContact your system administrator to verify your password.

Invalid ± [Test] Already Active

[Test] can be a CSU, DSU, or DTE Local Loopback, or a Send 511 or Monitor 511. The [test] was already in progress when another selection was made.

HAllow test to continue.

HSelect another test.

HStop the test.

Invalid Test	A loopback or 511 pattern	H	Wait until other test ends and
Combination	test was in progress when		message clears.
	Start was selected to start	H	Abort all tests from the Test
	another test, or was active
			menu screen.
	on the same or another
	interface when Start was	H	Stop the test from the same
	selected.		screen the test was started
			from.
Limit of six Login IDs	An attempt to enter a new	1.	Delete another login/password
reached	login ID was made, and the		combination.
	limit of six login/password	2.	Reenter the new login ID.
	combinations has been
	reached.
No Security Records	Delete was selected from	H	No action needed.
to Delete	the Administer Login	H	Enter a security record.
	screen, and no security
	records had been defined.
1 x is the character not being accepted.

8-4 November 1997 7610-A2-GB20-10