Monitoring the DSU
6-8 7610-A2-GB20-10
November 1997
Network Performance Statistics
Performance statistics for the network interface are available to:
Monitor the current status of the network operations.
View the DSU’s performance statistics, which:
— Assist you in determining the duration of specific conditions.
— Provide a historical context for problem detection and analysis.
To view the Network Performance Statistics, follow this menu selection sequence:
Main Menu
→
Status
→

Performance Statistics

main/status/performance
Device Name: Model: 7610
NETWORK PERFORMANCE STATISTICS
No Signal Count: 101920 26:33:08
Out of Service Count: 0 0:00:00
Out of Frame Count: 621 8:53:49
Excessive BPV Count: 99830 144:28:11
Invalid BPV Count: 87409
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
ESC for previous menu MainMenu Exit
Refresh ClrStats
All counts show the number of occurrences since the last reset of the counters.
Invalid BPV is a raw count of the number of invalid Bipolar Violations. In the last
column,

hhh:mm:ss

indicates the amount of time the condition has existed in
hours, minutes, and seconds. When the maximum time has been exceeded,
255:59:59+ appears.
The screen appears with the cursor in the function area below the dotted line. To
update the performance statistics, select Refresh and press Return.
Select ClrStats and press Return to clear all statistics and refresh the screen.
ClrStats is not available for an Access level of 3.