Paradyne 7610, SNMP DSU manual Screen Work Areas, Menu Path

Using the ATI

Screen Work Areas

There are two user work areas:

Screen area ± Provides the menu path, access level, menus, and input fields above the dotted line. Refer to Entering Device and System Information in Chapter 3.

The menu path appears as the first line on the screen. In this manual, the menu path is presented as a menu selection sequence with the names of the screens:

Main Menu → Configuration → Load Configuration From → Edit →

User Interface → Terminal Port

Screen function key area ± Provides functions available below the dotted line based upon screen selection and access level. Refer to the Switching Between Screen Work Areas section.

Menu Path

		main/configuration/edit/user/term
		Device Name:				Model: 7610
			TERMINAL PORT OPTIONS
			Data Rate (Kbps):	9.6
			Character Length:	8
			Parity:	None
			Stop Bits:	1
			Monitor DTR:	Enable		Input Fields
			Login Required:	Enable
			Port Access Level:	Level 1
			Inactivity Timeout:	Enable
			Disconnect Time(minutes):	5
Screen		±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±È±±±±±±±±±±±±±±±±±±±±±±±±±±±±±
		Ctrl-a to access these functions, ESC for previous menu			MainMenu Exit
Function			Save
Keys		Select: 2.4, 4.8, 9.6, 14.4, 19.2, 28.8, 38.4		System		No Signal
Field Value
	Choices			Messages

2-4 November 1997 7610-A2-GB20-10