External Device Options for the Management Port | Paradyne SNMP DSU

Configuration Option Tables

Table A-5. Management Port Options (3 of 3)

Stop Bits

Possible Settings: 1, 1.5, 2

Default Setting: 1

Provides the number of stop bits for the Management port.

HStop Bits option appears when Port Type is set to Asynchronous.

1, 1.5, or 2 ± Selects the number of stop bits.

Monitor DTR

Possible Settings: Enable, Disable

Default Setting: Enable

Specifies monitoring of the Data Terminal Ready (DTR) control lead.

HMonitor DTR option appears when Port Type is set to Asynchronous.

Enable ± Standard operation of the DTR control lead.

Disable ± DTR is ignored. Some external device connections may require this setting.

Routing Information Protocol

Possible Settings: None, Proprietary

Default Setting: None

Specifies the routing protocol between devices through the Management port.

HRouting Information Protocol appears when Port Use is set for Net Link.

None ± No routing protocol; use None when the device connected to the Management port is not a Model 7610.

Proprietary ± Uses proprietary variant of RIP Version 1 to enable the routing of IP traffic between Paradyne devices.

External Device Options for the Management Port

To access the External Device Options screen, follow this menu selection sequence:

Main Menu → Configuration → Load Configuration From → Edit →

User Interface → External Device

7610-A2-GB20-10

November 1997

A-15

Image 74

Paradyne SNMP DSU, 7610 manual External Device Options for the Management Port, Table A-5. Management Port Options 3

Contents

Model 7610 Snmp DSU Copyright 1996 Paradyne Corporation All rights reserved Contents Customizing the Snmp DSU Monitoring the DSU Configuration Option Tables Glossary Index Document Summary About This GuideDocument Purpose and Intended Audience Product-Related Documents Appendix a Model 7610 Snmp DSU Features About the Snmp DSU Snmp Management Capabilities MIB Support Typical Snmp DSU Configurations Supported Link-Layer Protocols Modem User Interface TypesRear Panel Interface Connections Terminal Connecting to the Terminal Port Using the ATIAccessing the ATI Select Status Test Configuration ControlMain Menu Edit/Display Use the screen format Screen Format TypesWhat Affects Screen Displays Screen Work Areas Menu Path Press Navigating the ScreensKeyboard Keys Screen Function Keys For the screen function Select Press Return to Switching Between Screen Work Areas Ending a Session Customizing the Snmp DSU Entering Device and System Information Identity Information System Fields Configuration Option Area Configuration Option Set Configuring the DSUConfiguration Option Areas If you select Then Accessing and Displaying Configuration OptionsSaving Configuration Options Establishing Call Setup Call Directories Screen Call Directory Phone Number Entries Characters Use Call Setup Screen Main Menu → Control → Call Setup Security Security Overview Creating a Login On the Administer Enter Logins screen, for Deleting a Login Effective Access Levels ATI Access to Menu Functions ATI AccessEffective Access Level Connection Refused User Interface AlreadyInterface Idle appears Controlling Snmp Access Assigning Snmp Community Names and Access Levels IP Addressing Selecting an IP Addressing Scheme Remote Site IP Addressing Scheme ExamplesIMC Connection ± Same Subnet Subnet Using Routers to Route DSU Management Data DDS Assigning IP Addresses and Subnet Masks Choosing a Default Network DestinationIf using Then DSU LEDs Monitoring the DSUWhat to Monitor System LEDs Main Menu → Status → Display LEDs NS ± No Signal DM ± Data ModeOOS ± Out of Service Network LEDs Port LEDs Hhhmmss Unit StatusViewing Health and Status Yyyyyyyy Network Interface Status Self-Test Results Network Performance Statistics Network Performance Statistics Alarm Condition TestingDetecting Problems Trap ATI Status Ascii Alarm Screen If configured Tests Available Network Tests Send V.54 Up/Down Sequences CSU or External Network LoopbackDSU or Internal Network Loopback Test Pattern for the Network Data Port TestsLamp Test Local Loopback Test Status Messages 1 Meaning Ending an Active TestTest Status Messages Loopbacks 1 Loopback Type Initiated By LoopbacksTest Status Messages 2 Meaning Device Reset Loopbacks 2 Loopback Type Initiated By If entering yes to prompt Then all Alarm Messages Messages and TroubleshootingMessages and Troubleshooting Ascii Alarms Ascii Alarm Messages Configuring Snmp Traps Dialing Out Snmp Traps Device Messages Device Messages 1 What Message Indicates What To Do Device Messages 2 What Message Indicates What To Do TroubleshootingTroubleshooting 1 Symptom Possible Cause Solutions Troubleshooting 2 Symptom Possible Cause Solutions Tests Available section Select To Access To Configure Configuration Option TablesConfiguration Option Tables Overview Table A-1. System Options 1 Operating ModeSystem Options Menu Edit/Display Status DDS Line Rate Kbps Lads Timing Possible Settings Internal, External, ReceiveTable A-1. System Options 2 Lads Line Rate Kbps Table A-1. System Options 3 Test TimeoutSecurity Violation Alarm Test Duration min Network-initiated DSU Loopback 64K CC Network Interface Options MenuTable A-2. Network Interface Options 1 Data Scrambling 64K CC IMC Routing Information Protocol Cross Pair Detection AlarmTable A-2. Network Interface Options 2 Out of Frame Alarm No Signal AlarmOut of Service Alarm Excessive BPV Alarm In-Band Framing Alarm Table A-2. Network Interface Options 4 Invert Transmit Clock Data Port Options MenuTable A-3. Data Port Options 1 Bilateral Loopback Rlsd Control Table A-3. Data Port Options 2Carrier Control by RTS Table A-3. Data Port Options 3 User Interface Options MenuTerminal Port Options Table A-4. Terminal Port Options 1 Table A-4. Terminal Port Options 2 Login RequiredPort Access Level Possible Settings Level 1, Level 2, Level Parity Table A-5. Management Port Options 1 Management Port OptionsTable A-4. Terminal Port Options 3 Clock Source Port Type Possible Settings Asynchronous, SynchronousTable A-5. Management Port Options 2 Routing Information Protocol External Device Options for the Management PortTable A-5. Management Port Options 3 Table A-6. External Device Options 1 External Device CommandsDial-In Access Connect Prefix Escape Sequence Table A-6. External Device Options 2Connect Indication String Table A-7. Telnet Session Options 1 Telnet Session OptionsTable A-6. External Device Options 3 Disconnect String Table A-7. Telnet Session Options 2 Disconnect Time minutes Ascii Alarm Messages Alarms & Traps Options MenuTable A-8. Alarms & Traps Options 1 Alarm & Trap Dial-Out Call Retry Table A-8. Alarms & Traps Options 2Snmp Trap Disconnect Alternate Dial-Out Directory Table A-9. Communication Protocol Options 1 Snmp & Communication Options MenuCommunication Protocol Options Management Port Link Protocol Default Network DestinationTable A-9. Communication Protocol Options 2 Table A-10. General Snmp Management Options 1 Name 1 AccessGeneral Snmp Management Options Snmp Management Table A-10. General Snmp Management Options 2 Name 2 AccessSnmp NMS Security Options Table A-11. Snmp NMS Security Options 1 Access Level Table A-11. Snmp NMS Security Options 2 Snmp Traps Snmp Traps OptionsTable A-12. Snmp Traps Options 1 Number of Trap Managers Enterprise Specific Traps Link Traps Possible Settings Disable, Up, Down, BothTable A-12. Snmp Traps Options 2 Link Trap Interfaces Ascii Characters Hex Table A-13. Ascii Non-Printable Characters SequenceHex Sequence Worksheets Configuration WorksheetsConfiguration Option Settings Overview Network Interface None, Proprietary External Device Terminal PortManagement Port General Snmp Management Enable, DisableCommunication Protocol Snmp NMS Security MIB II ± RFC 1213 and RFC MIB DescriptionsMIB Description Overview RS-232-Like MIB ± RFC Enterprise MIB Objects Datalink/subnetwork 2 ± System GroupPhysical 1 ± Layer Internet 4 ± Layer IfEntry Interfaces GroupInterfaces Software Revision PPP Testing3 state Management port is Extension to Interface Table ifXTable IfXEntry Interface Test Table Testing3Interface Stack Group Down2 IfTestEntry2 InSyncNoBitErrors ifTestCode 2 ±InSyncWithBitErrors IP Group Table C-6. IP Group Objects 1 Description Setting/ContentsGeneric Receive Address Table Table C-6. IP Group Objects 2 Description Setting/Contents UDP Group Icmp GroupTCP Group Transmission Group General Port Table Objects RS-232-Like MIB, RFCNumber of RS-232-Like Ports Object Rs232PortEntry Asynchronous Port Table Objects Rs232Async PortEntry Rs232Sync Synchronous Port Table ObjectsRs232Async Rs232Sync PortEntry Input Signal Table ObjectsInteger number ± represents Rs232InSigEntry Output Signal Table Objects Rs232OutSigEntry DDS Interface Specific Definitions, pdn-dds pdn-interfaces Device Configuration Variable pdn-commonPort Usage Table, pdn-devPortUsage pdn-interfaces Device Security, pdn-security pdn-common Trap authentificationFailure Standards Compliance for Snmp TrapsSnmp Traps Overview Snmp Trap Description Possible Cause Interface LinkUp/Down Variable-Bindings Possible Cause Trap warmStartTraps linkUp and linkDown Traps Enterprise Specific Trap What It Indicates Possible Cause 7610-A2-GB20-10 Cables and Pin Assignments Cabling Overview Signal Direction Pin # Terminal Port EIA-232 ConnectorManagement Port EIA-232 Connector Direction Pin Socket Connector User Data Port ConnectorSignal Standard EIA-232-D Crossover Cable Pin RJ48S DDS Network Interface Cable Functions Circuit Pin # LAN Adapter Converter and CableModular RJ48S DDS Network Interface Cable Cable Plug to Modular Jack LAN Adapter Glossary Enterprise MIB Factory defaultsEIA-232 Excessive BPV Link layer protocol ResetLatching loopback Loopback Subnet RouterRS-232 Subnet address Index Numbers IN-2 IN-3