3-1

7610-A2-GB20-10 November 1997
Customizing the SNMP DSU 3

Entering Device and System Information

Use the Device Name screen to input DSU device and SNMP system entries. To
access the Device Name screen, follow this menu selection sequence:
Main Menu
Control
Device Name
main/control/device name
Device Name: Model: 7610
DEVICE NAME
Device Name: NE815378 Clear
System Name: lllQJ98-001 Clear
System Location: Bldg. A412, 2nd Floor, Left cabinet Clear
System Contact: Joe Smith 800-555-5555 pager 888-555-5555 Clear
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save
Any printable ASCII characters are valid entries for all the Device Name screen
inputs. Refer to the
ASCII Characters
section in Appendix A. The Device Name
field is alphanumeric and provides for an input of 20 characters. The Device
Name entry appears on all ATI screens. The input on this screen is displayed on
the Identity screen. Refer to the
Identity Information
section.