MIB Descriptions

Enterprise MIB Objects

The following lists the Paradyne Enterprise specific MIB Objects supported by the unit.

Device Configuration Variable (pdn-common 7)

The variable devConfigAreaCopy in the devConfigArea group is supported. This variable allows the entire contents of one configuration area to be copied into another configuration area. The unit only supports the following values.

Table C-13. Device Configuration Variable

Object

Description

Setting/Contents

 

 

 

devConfig

A ªgetº of this object will always return noOp.

noOp(1)

AreaCopy

 

 

Copy from active area to customer 1 area.

active-to-customer1(2)

 

 

 

 

 

Copy from active area to customer 2 area.

active-to-customer2(3)

 

 

 

 

Copy from customer 1 area to active area.

customer1-to-active(4)

 

 

 

 

Copy from customer 1 area to customer 2

customer1-to-customer2(5)

 

area.

 

 

 

 

 

Copy from customer 2 area to active area.

customer2-to-active(6)

 

 

 

 

Copy from customer 2 area to customer 1

customer2-to-customer1(7)

 

area.

 

 

 

 

 

Copy from factory area to active area. There

factory1-to-active(8)

 

is only one factory area for the unit.

 

 

 

 

 

Copy from factory area to customer 1 area.

factory1-to-customer1(9)

 

 

 

 

Copy from factory area to customer 2 area.

factory1-to-customer2(10)

 

 

 

Port Usage Table, pdn-devPortUsage (pdn-interfaces 3)

The Port Usage Table specifies whether the Management port is configured for ASCII alarms, as an SNMP management link, or is disabled. Supports the values alarm(1), netLink(3), and none(5).

DDS Interface Specific Definitions, pdn-dds (pdn-interfaces 2)

The DDS Interface Specific Definitions contain objects that are used to manage the DDS Network Interface. Fully supported by the unit.

Device Security, pdn-security (pdn-common 8)

Use the Device Security table to control the number of SNMP managers that may access the unit, as well as the unit access level (read or read/write). Fully supported by the unit.

Device Traps, pdn-traps (pdn-common 9)

Controls the SNMP managers to which the unit reports traps. Fully supported by the unit.

Device Control, pdn-control (pdn-common 10)

Uses the devControlReset object to reset the unit. Fully supported by the unit.

C-18

November 1997

7610-A2-GB20-10

Page 111
Image 111
Paradyne 7610, SNMP DSU manual Device Configuration Variable pdn-common, Port Usage Table, pdn-devPortUsage pdn-interfaces