...the speed reading is 00 or there is no speed reading on the

display while cycling?

1.Check the correct position and distance of the speed sensor with the spoke magnet and the wrist unit.

2.Check that you have set bike 1 or 2 on.

3.If the 00 reading appears irregularly, this may be due to temporary electromagnetic interference in your current surroundings.

4.If the 00 reading is constant, you may have exceeded 2500 riding hours and the battery of the speed sensor needs to be replaced.

5.If you are using the wireless Polar Speed Sensor, check that Power is turned off in the Options mode.

...inaccurate altitude readings?

The influence of a sudden temperature change (i.e., if you go outdoors in the winter) may cause temporarily inaccurate altitude readings. If the readings are constantly inaccurate, it may be caused by dirt blocking the air pressure channels (three openings on the backcover of the wrist unit). In this case, send the heart rate monitor to a Polar Service Center.

...the data transfer from wrist unit to PC was unsuccessful?

1.Check the correct position of the wrist unit with the infrared window of the PC or the optional interface.

2.Check that the surroundings are not too bright. This problem often occurs near windows.

3.Check that there is no obstruction between the infrared windows.

H 100

Page 102
Image 102
Polar S725 user manual Inaccurate altitude readings?, Data transfer from wrist unit to PC was unsuccessful?