4 | 4. There are two spoke magnet options. |
|
You only need to install one of them.
|
| Check which of the magnets fits the spoke |
|
| of your bike best. One (A) is installed by |
|
| rotating it around the spoke before putting |
|
| the metal cover on, another (B) by |
|
| tightening the screw. The magnet must be |
|
| facing the speed sensor. |
|
| 5. |
A or | B | magnet and the sensor so that the magnet |
|
| passes the sensor closely but does not |
|
| touch it. The maximum distance between |
|
| the speed sensor and the spoke magnet |
5 |
| should be 5 mm/ 0.2". Once positioned |
| correctly, tighten the cable ties securely | |
|
| |
|
| and cut off any excess cable tie ends. |
|
| Your safety is important to us. While riding |
|
| your bike, please keep your eyes on the |
|
| road to prevent possible accidents and |
|
| injury. Check that you can turn the handle |
|
| bar normally and cable wires for brakes or |
|
| gearing do not catch on the sensor. Check |
|
| also that the sensor does not disturb |
|
| pedaling or the use of brakes or gearing. |
A 10
