1max 50 cm / 1´8´´
60°
2
Riding direction
If you are using Polar S725 with Polar Power Output Sensor, please see the bike mount and sensor installation instructions in the Power Output Sensor user manual. If you use the Power Sensor, you do not need to mount any other sensors on your bicycle.
Installing the Polar Bike Mount™
Use cable ties to secure the bike mount snugly on the rubber pad. Attach the wrist unit by securing the wrist strap.
Installing the Polar Speed Sensor™
The Polar Speed Sensor measures speed and distance when cycling.
1.Check the front side of the front fork to find a suitable place for the speed sensor. The sensor should be attached less than 50 cm/ 1’8" from the mounted wrist unit. The smaller the distance the better. Clean and dry the area underneath the rubber pad before you attach it to the front fork.
2.Place the sensor in the position as in illustration 2. Then adjust the sensor towards the wheel as much as possible.
3.Pass the cable ties through the sensor holes and loosely adjust the ties. Do not tighten fully yet. If the cable ties are too short for your bicycle, put two of them together to make them longer.
A 9
