METHOD 2. |
|
|
Mark the tread of the front tire with a line and roll the tire |
|
|
perpendicular to the ground. You can also use the valve as |
|
|
a mark. Mark a line on the ground. Move your bike on a |
|
|
flat surface straight ahead for one complete wheel rotation. |
|
|
Check that the tire is perpendicular to the ground. Draw |
|
|
another line on the ground exactly where the mark on the |
|
|
front tire touches the ground. |
|
|
Measure the distance between the two lines on the ground. |
| mm |
| ||
Substract 4 mm to account for your weight on the bike to | - 4 mm | |
get your wheel circumference. |
|
|
This is the value you must set on the meter. |
| mm |
| ||
The wheel size is always indicated in millimeters as this is more accurate. Resetting the monitor enters the default values.
Cadence* on/off
If you start from the Time of day display, repeat steps 1-5.
6.Scroll up or down until Cadence is displayed.
7.Press OK to start setting the Cadence. On/OFF starts to flash.
8.Scroll up or down to set the Cadence on or off. Press OK.
*Optional Polar Cadence Sensor or Polar Power Output Sensor required.
B 38
