Receiving a SprintReady Link Call

ToreceiveaSprintReadyLinkcall:

1.Make sure your phone’s Sprint Ready Link mode is enabled. (See “Setting Sprint Ready Link Mode”on page 142.)

2.When you receive a Sprint Ready Link call from a contact, “R-Link Call,”the contact’s name and the

Sprint Ready Link number are displayed. (You do not need to take any action to answer the call.)

When you receive a group call, “Group Call,”the group member’s name, and the Sprint Ready Link number are displayed.

3.If the person placing the call has kept the floor (held the Ready Link/Voice Memo key), you will see the contact’s name and Sprint Ready Link number along with “has floor,”and you will hear the caller speaking.

4.When the caller finishes speaking and releases , you will see “Floor is open”on the display screen. Press

and hold to take the floor and reply to the caller. (You will see “You have floor”and hear a tone confirming that you may speak.)

5.When the conversation is finished, press .

Tip:

You can also receive a SprintReady Link call with the phone

 

closed. Press and hold the Ready Link/Voice Memo key to take

 

the floor when the floor is open.

 

 

Note:

You can change the volume and the speaker setting while a SprintReady Link call is activated. Volume:Adjust the voice volume by using the side volume keyor by pressing the navigation keyupordown (exceptwhen you are pressing and holding the Ready Link/Voice Memo key). Speaker:Switch the speaker on or offby pressing SPEAKER.

150 Section 2I: Using Sprint Ready Link

Page 166
Image 166
Sanyo SCP-3200 manual Receiving a SprintReady Link Call, ToreceiveaSprintReadyLinkcall