Section 3B: SprintVision 217
While connecting, the following message will be displayed on
the screen: Connecting... Please wait.
If you had a previous SprintVision connection, the lastpage
you visited will be displayed when you open your browser.
When this occurs, you may notsee the “Connecting...”
message when you startthe session. Though the browser is
open, you are notcurrently in an active data session — that is,
no data is being sentor received. As soon as you navigate to
another page, the active session will startand you will see the
“Connecting...”message.
NetGuard
When you firstconnect to the Web, the Net Guard will be
displayed to confirm thatyou wantto connect . This feature
helps youavoid accidental connections. You can disable the
NetGuard in the future by selecting Always Auto-Connect
when the NetGuard is displayed.
Tochangeyour NetGuard settings:
©Select >Settings > Data > NetGuard.
nSelectOn to activate the NetGuard.
nSelectOff to deactivate the Net Guard.
Note:
When enabled, the NetGuard appears only once as long as you
have notturned the phone off and on.
Tip: When Ready Link Guard is setto on, a warning message will
be displayed. Press Continue(leftsoftkey) to continue.
(See “Setting Ready Link Guard”on page 160.)
SprintVision