40 Section 2A: Phone Basics
Dialing From the Contacts List
To dial directly from a Contacts entry:
1. Select >Contacts > Find/Add Entry.
2. Highlightthe entry you want to call and press to dial
the entry’s defaultphone number.
–or –
Todial another number from the entry, highlightthe
name and press , and then highlightthe number you
wish to call and press .
Using Speed Dialing
With this feature, you can dial your favorite entries using one
keypress for locations 2–9. (See “Assigning Speed Dial
Numbers”on page 113.)
To use speed dial for voice calls:
©From standby mode, press and hold the appropriate key
for approximately two seconds.
–or –
©From standby mode, press the appropriate key and
press .
Note: The icons nextto each entry representthe Contacts labels (for
example, Mobile, Home, Work, etc.). A triangle nextto an icon
means thereis another label for the entry. Press the
navigation key rightor leftfrom the Contacts list to select
alabel.
Tip: You can also place a call by selecting Options(rightsoftkey) >
Callor Call: Speaker On.
Shortcut: From the standby mode, selectContacts (right softkey) to
listentries.