Sanyo SCP-3200 manual End-of-Call Options, Saving a Phone Number, Tosaveanumberfromstandbymode

End-of-Call Options

To display the following options, press Options (right softkey) within 10 seconds after disconnecting a call. To select an option, highlight it and press .

⬤CallAgain to dial the phone number.

⬤Call:SpeakerOn to dial the phone number in speakerphone mode.

⬤SendMessageto send a Text, Picture Mail, or SMS Voice message.

⬤SavePhone# to save the phone number in your Contacts list.

■GotoPh.Book is displayed when the number is already in your Contacts list. (See “Saving a Phone Number”below.)

⬤Rename to change the current entry’s name to Caller ID name (if applicable).

Note: The End-of-Call options arenot displayed for calls identified as No IDor Private.

Saving a Phone Number

Your phone can store up to 500 phone numbers in up to 300 Contacts entries. (An entry may contain up to seven numbers.) Each entry’s name can contain 32 characters. Your phone automatically sorts the Contacts entries alphabetically. (For more information, see Section 2F: Using Contacts on

page 107.)

Tosaveanumberfromstandbymode:

1.Enter a phone number.

2.Press Options (right softkey) >SavePhone#.

3.Select from the following entry modes:

■NewName to enter a new name.

PhoneBasics

Section 2A: Phone Basics 37