F/T Ring Time (Fax/Tel mode only)

If you set the Receive Mode to Fax/Tel, you’ll need to decide how long the machine will signal you with its special pseudo/double-ring when you have a voice call. (If it’s a fax call, the machine receives the fax.)

This pseudo/double-ring happens after the initial ringing from the phone company. Only the machine rings and no other phones on the same line will ring with the special pseudo/double-ring. However, you can still answer the call on any telephone on the same line as the machine. (See For Fax/Tel mode only on page 6-7.)

1If it is not illuminated in blue, press

(Fax).

2Press Menu/Set, 2, 1, 2.

Setup Receive 2.F/T Ring Time

3Press or to select how long the machine will ring to alert you that you have a voice call (20, 30, 40 or 70 seconds).

Press Menu/Set.

4Press Stop/Exit.

Note

Even if the caller hangs up during the pseudo/double-ringing, the machine will continue to ring for the set time.

Receiving a fax

Tray Use for Fax mode

If your machine does not have the optional tray #2, this setting is not available. The default setting of Auto allows your machine to choose the paper from the optional Tray #2 if Tray #1 is out of paper or if incoming faxes will fit best on the paper in Tray #2.

1Press Menu/Set, 1, 0.

General Setup 0.Tray Use:Fax

2Press or to select

Tray#1 Only, Tray#2 Only or Auto.

Press Menu/Set.

6

3Press Stop/Exit.

6 - 3

Page 56
Image 56
Savin SPC210SF manual Tray Use for Fax mode, Ring Time Fax/Tel mode only