Choosing a location | Savin SPC210SF specs

Important information

Choosing a location

Place your machine on a flat, stable surface that is free of vibration and shocks. Put the machine near a telephone wall jack and a standard, grounded AC power outlet. Choose a location where the temperature remains between 50°F and 90.5°F (10°C and 32.5°C) and the humidity is between 20% to 80% (without condensation).

IMPORTANT

■Avoid placing your machine in a high-traffic area.

■Do not place the machine near heaters, air conditioners, refrigerators, water, chemicals or devices that contain magnets or generate magnetic fields.

■Do not expose the machine to direct sunlight, excessive heat, open flames, salty or corrosive gasses, moisture, or dust.

■Do not connect your machine to an AC power outlet controlled by wall switches or automatic timers.

■Disruption of power can wipe out information in the machine’s memory.

■Do not connect your machine to an AC power outlet on the same circuit as large appliances or other equipment that might disrupt the power supply.

■Avoid interference sources, such as speakers or the base units of cordless phones.

■Do not put objects on top of the machine.

The following figure details the recommended area around the machine for proper ventilation, operation and maintenance.

8 in. (20 cm)

Back	14 in. (35 cm)
Front	28 in. (70 cm)

A

20 in. (50 cm)

A - 6

Image 98

Savin SPC210SF manual Choosing a location

Contents

User’s Guide Storing numbers Quick Reference GuideSending Faxes Dialing operations Single copy Using SearchMaking copies Press Black Start or Color Start Table of Contents Section II Fax & Telephone Receiving a fax Section III Copy Menu and Features Glossary Index Section General Information Using this GuideSymbols used in this Guide Finding information To view Documentation How to access the complete User’s GuideHow to find Scanning instructions Control panel overview Copy keys Temporary settingsMode keys Menu keys Fax and telephone keys Print key How can you avoid possible problems? Custom featuresWhy should there be problems? About fax machines ECM Error Correction Mode Fax tones and handshake Type and size of paper Loading paper and documentsAcceptable paper and other media Recommended paper Recommended paper specifications Paper capacity of the paper trays Handling and using special paper Types of paper to avoid Envelopes Before you print a lot of envelopes, test Types of envelopes to avoid Labels and transparencies Types of labels and transparencies to avoid Landscape Printable areaPortrait Loading paper and envelopes To load paper or other media in the paper tray ABC Printing on envelopes Using the ADF automatic document feeder Loading documents Using the scanner glass Automatic Daylight Savings Time SetupDate and Time Station ID LCD Contrast Phone line settingsTone and Pulse dialing mode Roll over phone lines Converting telephone wall outlets If you are installing the machine to work with a PBX Connecting an external or extension telephoneConnecting an external telephone answering device TAD Multi-line connections PBX Connections Recording outgoing message OGM on an external TAD Ecology featuresToner Save Mode Timer Sleep Time Paper Size Paper settingsPaper Type Beeper Volume Volume SettingsRing Volume Speaker Volume Setting up the password Security featuresSetting Lock Turning Setting Lock off Changing the Setting Lock passwordTurning Setting Lock on Memory Security Turning Memory Security off Changing the Memory Security passwordTurning Memory Security on Fax & Telephone Sending a fax How to FaxEntering Fax mode Sending a fax from the ADF Canceling a fax in progress Dual Access Sending a fax at the end of a conversation Sending a fax manuallyManual transmission Out of Memory message Broadcasting To stop a broadcast in progress Additional Sending Operations Sending faxes using multiple settingsChanging fax Resolution Contrast Real Time Transmission Sending in real time for all faxes Overseas Mode Sending in real time for the next fax only Delayed Faxing Delayed Batch Transmission Checking job status and canceling a waiting job Composing the electronic Cover Send a cover page for all faxes Composing your own commentsCover page for the next fax only Using a printed cover Receive Mode Receiving a fax To select or change your Receive Mode Fax Receive SettingsRing Delay Tray Use for Fax mode Ring Time Fax/Tel mode only Receiving a fax at the end of a conversation Printing a reduced incoming fax Auto Reduction Changing the remote codes Easy Receive Printing a fax from the memory Setting the Print DensityUsing a cordless external handset Operation from extension telephones For Fax/Tel mode only Using the remote codes Manual dialing How to dialDialing and phone options One-Touch Dialing Search Fax Redial Storing One-Touch Dial numbers Storing numbersStoring a Pause Storing Speed-Dial numbers Changing One-Touch and Speed-Dial numbers Setting up Groups for Broadcasting Distinctive Ring Phone line servicesAccess codes and credit card numbers Tone or Pulse Before you choose the ring pattern to register What does ‘Distinctive Ring’ do?Do you have Voice Mail? Turning off Distinctive Ring Caller IDRegistering the Distinctive Ring pattern Very important Viewing Caller ID List Printing Caller ID List Remote Fax Options Fax Forwarding 0 0 5 5 5 1 2 3 4 # # Programming your pager numberFax Storage 3 4 5 # Redial/Pause 1 8 0 0 5 5 5 6 7 8 9 # # PC Fax Receive Changing Remote Fax Options Turning off Remote Fax Options Remote Retrieval Setting the Remote Access CodeUsing your Remote Access Code Long beep Fax messages No beeps No messages Remote commands Retrieve a fax Retrieving fax messages Changing the Fax Forwarding number Transmission Verification Report Printing reportsFax reports Fax Journal Activity report How to print a report Additional reports Polling Operation Set up to receive pollingPolling Polling Receive Setup for Polled Transmit Polled Transmit Copy Making copies How to copyEntering Copy mode Printable Area To change the default setting follow the instructions below Tray Use for Copy modeCancel copying Making multiple copies Copy options Increasing copy quality Press Enlarge/Reduce Enlarging or reducing the image copiedEnlarge/Reduce If you are using the scanner glass Making N in 1 copies or a poster page layout Poster3 x Brightness Sorting copies using the ADFAdjusting Brightness Contrast and Color Contrast Color saturation Out of Memory message Legal limitations Scanning Remote SetupPrinting ControlCenter2 Appendixes Important information Important about the interface cable Important information Disconnect device For your safetyLaser safety LAN connection Important safety instructions FDA regulations Chapter a Choosing a location To use the machine safely Important information Important Safety Instructions Trademarks Memory storage Menu and FeaturesOn-screen programming Menu table Menu keys Menu Table Options Descriptions Auto Main Menu Submenu Fax Setup Send Batch TX Fax Report High Printer Test Print Apipa LAN Setup Mail Tiff Serial No Copy options key Inserting spaces Special characters and symbolsEntering Text Making corrections Error messages Troubleshooting and routine maintenanceTroubleshooting Chapter C Troubleshooting and routine maintenance Your PC. See Transferring faxes to your PC on Transferring faxes to your PC Checking if the machine has faxes in its memoryForwarding faxes to another fax machine Document is jammed under the document cover Document jamsDocument is jammed in the top of the ADF unit Document is jammed at the output tray Paper jams Paper Jam A1 / Paper Jam A2 Paper Jam B Paper Jam C If you are having difficulty with your machine Difficulty Suggestions Sending Faxes Printing Difficulties Software Difficulties Print Quality Difficulties Improving the print quality Examples of poor print quality Recommendation Conductor Unit Type 140 on page C-33 All one color Insufficient gloss Compatibility Routine maintenanceSetting Dial Tone Detection Cleaning the outside of the machine Clean the outside of the machine as follows Cleaning the scanner glass Cleaning to prevent paper jams Troubleshooting and routine maintenance Cleaning the laser glass Troubleshooting and routine maintenance Replacing the consumable items Toner Empty Near Waste Toner Toner cartridges Toner nearly empty message Toner empty message Replacing a toner cartridge How to replace a toner cartridge Waste toner pack Waste toner pack full message Replacing the waste toner pack Replacing the OPC belt cartridge Photo Conductor Unit Type OPC belt cartridgeReplace OPC belt cartridge message Reset the OPC belt life counter Checking the Page Counters Machine InformationChecking the Serial Numbers Checking remaining life of parts How to install the lower tray unit Optional accessoriesOptional accessories Lower tray unit Paper Feed Unit Type Optional accessories Putting paper in the lower tray unit Installing additional memoryMemory Unit Type C 64/128/256 MB Prohibit Optional accessories Chapter D Specifications Product description General Print media Paper Input Paper Tray Fax Document Size Copier Print Up to 600 x 600 dpi Scanner Printer Interfaces Computer requirements RAM Replacement Toner Cartridges Consumable items Network LAN LAN Glossary Menu mode ECM Error Correction ModeFine resolution Easy Receive Remote Access Code Overseas ModePhoto resolution Remote Retrieval Access Temporary settings Super Fine resolutionTelephone Answer Code for Fax/Tel mode only User Settings Index Cover Help Manual Network Configuration Equipment Attachment Limitations User’s Guide