Toner cartridges, Toner nearly empty message | Savin SPC210SF

Chapter C

Note

■Discard the used consumable item according to local regulations, keeping it separate from domestic waste. If you have questions, call your local waste disposal office. Be sure to re-seal the consumable item tightly so that the material inside does not spill.

■We recommend placing used consumable items on a piece of paper or cloth to prevent accidentally spilling or scattering the material inside.

■If you use paper that is not a direct equivalent for the recommended paper, the life of consumable items and machine parts may be reduced.

■The projected life for each of the items listed is based on an average of 5% coverage of the printable area using any color toner cartridge. Frequency of replacement will vary depending on the complexity of printed pages, percentage of coverage and type of media used.

Toner cartridges

A new toner cartridge contains enough toner to print approx. 10,000 pages for Black and approx. 6,600 pages for Cyan, Magenta and Yellow Letter/A4-size single-sided pages at about 5% coverage.

Note

■The amount of toner used varies depending on how much print is on the page and the print density setting.

■If you change the print density setting for lighter or darker printing, the amount of toner that is used will change.

Toner nearly empty message

Check printed pages, page counter, and display messages regularly. If you see the message below, the machine has nearly run out of the indicated toner or the indicated toner is not evenly distributed inside the cartridge. Make sure you have a new toner cartridge ready for replacement.

Toner Low

X

X = C, M, Y, K

C stands for Cyan, M stands for Magenta and Y stands for Yellow, K stands for Black.

Although you can print approx. 300 (Black) and approx. 500 (Cyan, Magenta and Yellow) additional pages (at 5% coverage) after the Toner Low message first appears, you should replace the toner cartridge with a new one before it becomes completely empty.

C - 28

Image 145

Savin SPC210SF manual Toner cartridges, Toner nearly empty message

Contents

User’s Guide Sending Faxes Quick Reference GuideStoring numbers Dialing operations Making copies Using SearchSingle copy Press Black Start or Color Start Table of Contents Section II Fax & Telephone Receiving a fax Section III Copy Menu and Features Glossary Index Section Symbols used in this Guide Using this GuideGeneral Information Finding information How to find Scanning instructions How to access the complete User’s GuideTo view Documentation Mode keys Copy keys Temporary settingsControl panel overview Menu keys Print key Fax and telephone keys Why should there be problems? Custom featuresHow can you avoid possible problems? About fax machines Fax tones and handshake ECM Error Correction Mode Acceptable paper and other media Loading paper and documentsType and size of paper Recommended paper Paper capacity of the paper trays Recommended paper specifications Types of paper to avoid Handling and using special paper Before you print a lot of envelopes, test Envelopes Types of envelopes to avoid Types of labels and transparencies to avoid Labels and transparencies Portrait Printable areaLandscape To load paper or other media in the paper tray Loading paper and envelopes Printing on envelopes ABC Loading documents Using the ADF automatic document feeder Using the scanner glass Date and Time SetupAutomatic Daylight Savings Time Station ID Tone and Pulse dialing mode Phone line settingsLCD Contrast Roll over phone lines Converting telephone wall outlets Connecting an external telephone answering device TAD Connecting an external or extension telephoneIf you are installing the machine to work with a PBX Multi-line connections PBX Connections Toner Save Ecology featuresRecording outgoing message OGM on an external TAD Sleep Time Mode Timer Paper Type Paper settingsPaper Size Ring Volume Volume SettingsBeeper Volume Speaker Volume Setting Lock Security featuresSetting up the password Turning Setting Lock on Changing the Setting Lock passwordTurning Setting Lock off Memory Security Turning Memory Security on Changing the Memory Security passwordTurning Memory Security off Fax & Telephone Entering Fax mode How to FaxSending a fax Sending a fax from the ADF Dual Access Canceling a fax in progress Manual transmission Sending a fax manuallySending a fax at the end of a conversation Out of Memory message To stop a broadcast in progress Broadcasting Changing fax Resolution Sending faxes using multiple settingsAdditional Sending Operations Contrast Sending in real time for all faxes Real Time Transmission Sending in real time for the next fax only Overseas Mode Delayed Batch Transmission Delayed Faxing Composing the electronic Cover Checking job status and canceling a waiting job Cover page for the next fax only Composing your own commentsSend a cover page for all faxes Using a printed cover Receiving a fax Receive Mode Ring Delay Fax Receive SettingsTo select or change your Receive Mode Ring Time Fax/Tel mode only Tray Use for Fax mode Printing a reduced incoming fax Auto Reduction Receiving a fax at the end of a conversation Easy Receive Changing the remote codes Using a cordless external handset Setting the Print DensityPrinting a fax from the memory Operation from extension telephones Using the remote codes For Fax/Tel mode only Dialing and phone options How to dialManual dialing One-Touch Dialing Fax Redial Search Storing a Pause Storing numbersStoring One-Touch Dial numbers Changing One-Touch and Speed-Dial numbers Storing Speed-Dial numbers Setting up Groups for Broadcasting Access codes and credit card numbers Phone line servicesDistinctive Ring Tone or Pulse Do you have Voice Mail? What does ‘Distinctive Ring’ do?Before you choose the ring pattern to register Registering the Distinctive Ring pattern Caller IDTurning off Distinctive Ring Very important Printing Caller ID List Viewing Caller ID List Fax Forwarding Remote Fax Options Fax Storage Programming your pager number0 0 5 5 5 1 2 3 4 # # 3 4 5 # Redial/Pause 1 8 0 0 5 5 5 6 7 8 9 # # PC Fax Receive Turning off Remote Fax Options Changing Remote Fax Options Using your Remote Access Code Setting the Remote Access CodeRemote Retrieval Long beep Fax messages No beeps No messages Retrieve a fax Remote commands Changing the Fax Forwarding number Retrieving fax messages Fax reports Printing reportsTransmission Verification Report Fax Journal Activity report Additional reports How to print a report Polling Set up to receive pollingPolling Operation Polling Receive Polled Transmit Setup for Polled Transmit Copy Entering Copy mode How to copyMaking copies Printable Area Cancel copying Tray Use for Copy modeTo change the default setting follow the instructions below Making multiple copies Increasing copy quality Copy options Enlarge/Reduce Enlarging or reducing the image copiedPress Enlarge/Reduce Making N in 1 copies or a poster page layout If you are using the scanner glass Poster3 x Adjusting Brightness Contrast and Color Sorting copies using the ADFBrightness Color saturation Contrast Legal limitations Out of Memory message Printing Remote SetupScanning ControlCenter2 Appendixes Important information Important information Important about the interface cable Laser safety For your safetyDisconnect device LAN connection FDA regulations Important safety instructions Chapter a Choosing a location To use the machine safely Important information Important Safety Instructions Trademarks On-screen programming Menu and FeaturesMemory storage Menu table Menu keys Options Descriptions Menu Table Auto Main Menu Submenu Fax Setup Send Batch TX Fax Report High Printer Test Print Apipa LAN Setup Mail Tiff Serial No Copy options key Entering Text Special characters and symbolsInserting spaces Making corrections Troubleshooting Troubleshooting and routine maintenanceError messages Chapter C Troubleshooting and routine maintenance Your PC. See Transferring faxes to your PC on Forwarding faxes to another fax machine Checking if the machine has faxes in its memoryTransferring faxes to your PC Document is jammed in the top of the ADF unit Document jamsDocument is jammed under the document cover Document is jammed at the output tray Paper jams Paper Jam A1 / Paper Jam A2 Paper Jam B Paper Jam C Difficulty Suggestions If you are having difficulty with your machine Sending Faxes Printing Difficulties Software Difficulties Print Quality Difficulties Examples of poor print quality Recommendation Improving the print quality Conductor Unit Type 140 on page C-33 All one color Insufficient gloss Setting Dial Tone Detection Routine maintenanceCompatibility Clean the outside of the machine as follows Cleaning the outside of the machine Cleaning to prevent paper jams Cleaning the scanner glass Troubleshooting and routine maintenance Cleaning the laser glass Troubleshooting and routine maintenance Toner Empty Replacing the consumable items Near Waste Toner Toner nearly empty message Toner cartridges Replacing a toner cartridge Toner empty message How to replace a toner cartridge Waste toner pack full message Waste toner pack Replacing the waste toner pack Replace OPC belt cartridge message OPC belt cartridgeReplacing the OPC belt cartridge Photo Conductor Unit Type Reset the OPC belt life counter Checking the Serial Numbers Machine InformationChecking the Page Counters Checking remaining life of parts Optional accessories Optional accessoriesHow to install the lower tray unit Lower tray unit Paper Feed Unit Type Optional accessories Memory Unit Type C 64/128/256 MB Installing additional memoryPutting paper in the lower tray unit Prohibit Optional accessories Chapter D Product description General Specifications Paper Input Paper Tray Print media Document Size Fax Print Up to 600 x 600 dpi Copier Scanner Interfaces Printer RAM Computer requirements Consumable items Replacement Toner Cartridges LAN Network LAN Glossary Fine resolution ECM Error Correction ModeMenu mode Easy Receive Photo resolution Overseas ModeRemote Access Code Remote Retrieval Access Telephone Answer Code for Fax/Tel mode only Super Fine resolutionTemporary settings User Settings Cover Index Help Manual Network Configuration Equipment Attachment Limitations User’s Guide