Chapter 6
6 - 6

Printing a fax from the

memory

If you have selected Fax Storage
(Menu/Set,2,5,1), you can still print a fax
from the memory when you are at your
machine. (See Fax Storage on page 8-2.)
1Press Menu/Set,2,5,3.
2Press Black Start.

Setting the Print Density

You can adjust print density, making your
printed pages darker or lighter.
1If it is not illuminated in blue, press
(Fax).
2Press Menu/Set,2,1,6.
3Press to make the print darker.
OR
Press to make the print lighter.
Press Menu/Set.
4Press Stop/Exit.

Operation from extension

telephones

If you answer a fax call on an extension
telephone or an external telephone
connected to the EXT. jack of the machine,
you can make your machine take the call by
using the Fax Receive Code. When you
press the Fax Receive Code 51, the
machine starts to receive the fax.
If the machine answers a voice cal l and
pseudo/double-rings for you to take over, use
the Telephone Answer Code #51 to take the
call at an extension phone. (See F/T Ring
Time (Fax/Tel mode only) on page 6-3.)
If you answer a call and no one is on the line,
you should assume that you’re recei ving a
manual fax.
Press 51 and wait for the chirp or until
the machine’s LCD displays Receiving,
and then hang up.
You can also use the Easy Receive f eature to
make your machine automatically take the
call. (See Easy Receive on page 6-5.)

Using a cordless extern al

handset

If your cordless telephone is connected to the
EXT. jack of the machine and you typically
carry the cordless handset elsewhere, it is
easier to answer calls during the Ring Delay.
If you let the machine answer fir st, you will
have to go to the machine so you can press
Hook to transfer the call to the cordless
handset.
Remote Fax Opt
3.Print Fax
Setup Receive
6.Print Density