PAPER TRAY
BYPASS
TRAY
81/2x11
PLAIN

SPECIAL MODES

5 Select whether or not you wish to copy on the cover ("YES" or "NO").

PRINT ON COVER

YES NO

6 Select the paper tray for the cover.

1 The currently selected

CANCEL OK

paper tray for the cover is displayed.

2 The size and type of paper in the currently

selected tray is displayed.

In the example screen above, 8-1/2" x 11" (A4) size plain paper is loaded.

To change the paper tray for the cover, touch the tray selection key. (In the screen example, the "BYPASS TRAY" display is the tray selection key.) The tray selection screen appears when the tray selection key is touched. Select the desired tray in this screen.

NOTES

●When the cover paper is fed from the inserter, the cover cannot be copied on.

●Two-sided copying is not possible on label sheets, transparency film, and tabbed paper. When copying on a cover, do not select a tray that has one of these types of paper.

7 Touch the [OK] key.

CANCEL OK

RIGHT

G BINDING

COVER

SETTING

8 Touch the [OK] key.

 

OK

Return to the main

CANCEL

OK

screen of copy mode.

 

LEFT RIGHT

BINDING BINDING

COVER

SETTING

9 Place the original in the document feeder or on the document glass. (page 4-3)

10Ensure that the desired paper size has been automatically selected based on the original size.

 

To

select another

size

AUTO 11x17

paper, select the desired

 

size

and

touch

the

PAPER SELECT

[AUTO IMAGE] key. The

 

 

appropriate

copy

ratio

100%

will

be

selected

 

automatically based on

 

 

the original size and the paper size. (See steps 2 and 3 on page 4-15.)

11Select any desired copy settings such as

 

the exposure or number of copies, and

 

then press the [START] key.

 

12[When using the automatic document

 

feeder:]

 

Copying will start after all originals have been

 

scanned. (The next step is not needed.)

 

[When using the document glass:]

 

Replace the original with the next original and

5

press the [START] key. Repeat this operation until

all originals have been scanned and then touch

the [READ-END] key.

 

NOTES

●When the pamphlet copy function is set, the two- sided copying mode will be automatically selected.

●If this function is used in combination with the pamphlet copy function (pamphlet stapling) and the number of origial pages exceeds the number of pages that can be stapled, a message asking you to select "CANCEL", "CONTINUE", or "DIVIDE" will appear.

To cancel the job, select "CANCEL". To make pamphlet copies without stapling, select "CONTINUE". To divide the pages into sets that can be stapled, select "DIVIDE".

If you performed steps 4 to 6 to insert cover paper, divided stapling is not possible. You can either continue pamphlet copying without stapling, or cancel the job.

To cancel the pamphlet copy function, touch the [CANCEL] key on the pamphlet copy setting screen (step 2).

5-7