
REMOVING AN ORIGINAL MISFEED
Removing a misfed original from the automatic document feederIf an original misfeed occurs in the automatic document feeder, follow the steps below to remove the misfed original.
NOTES
●For misfeed removal in the main unit and other peripheral devices, see page
●When a misfeed occurs, touch the [INFORMATION] key to display detailed information for misfeed removal.
Check locations A and B in the diagram at left to remove the original.
2
1 Removing misfeeds from each location.
●Check location A
Open the document feeder cover and gently remove the misfed original without tearing it. Close the document feeder cover.
2 Opencover. and close the document feeder
Opening and closing the cover clears the misfeed display. Copying cannot be resumed until this
step is performed. However, this step is not
necessary after a
misfeed is removed from location B.
A message may appear indicating the number of originals which must be returned to the document feeder tray. Return the originals to the document feeder tray and press the [START] key.
●Check location B
●Misfeed in the transfer unit
Open the document transfer cover, hold the paper guide open, and remove the misfed original.
●Misfeed in the document exit unit
Open the document transfer cover. Rotate the transfer roller in the direction of the arrow and gently remove the original without tearing it.