LOADING PAPER

3 Gently push tray 1-tray 2 into the machine.

Push the tray firmly all the way into the machine.

4 Set the paper type.

If the paper size was changed from an inch size to an AB size, or from an AB size to an inch size, or if the paper type was changed, be sure to change the appropriate settings as explained in "Setting the paper type and paper size" (See page 2-10).

5 Loading paper in paper tray 1/tray 2 is now complete.

Loading paper in paper tray 3

2

Approximately 500 sheets of standard paper (20lbs. (80g/m2)) from 11" x 17" to 5-1/2" x 8-1/2"R size (A3 size to A5R)

 

can be loaded in tray 3. Special papers such as tabbed paper and transparency film can also be loaded. For

 

information on what special papers can be used, see "Specifications of paper trays (Types and sizes of paper that

 

can be used in the trays)" on page 2-8.To load tabbed paper or transparency film, see "Loading tabbed paper" or

 

"Loading transparency film" on the next page.

 

1 Pull out paper tray 3.

Gently pull the tray out until it stops.

2 Load paper into the tray.

The paper stack must not be higher than the indicator line (no more than 500 sheets of SHARP standard paper (20lbs. (80g/m2)).

To change the paper size, see "Changing the paper size in paper tray 3" below.

3 Gently push tray 3 into the machine.

Push the tray firmly all the way into the machine.

4 Set the paper type.

If the paper size was changed from an inch size to an AB size, or from an AB size to an inch size, or if the paper type was changed, be sure to change the appropriate settings as explained in "Setting the paper type and paper size" (see page 2-10).

5 Loading paper in paper tray 3 is now complete.

Changing the paper size in paper tray 3

1 Pull out paper tray 3.

If paper remains in the tray, remove it.

4 Gently push tray 3 into the machine.

Push the tray firmly all the way into the machine.

2 Adjust the guide plates A and B by squeezing their lock levers and sliding them to the paper size to be loaded.

The guide plates A and B are slidable. Adjust them to the paper size to

be loaded while squeezing their lock levers.

3 Load paper into the tray.

5 Set the paper type of the paper that was loaded in tray 3.

Be sure to change the appropriate settings as explained in "Setting the paper type and paper size" (see page 2-10).

If you changed the paper size, be sure to change the paper size setting. An incorrect paper size setting will cause the wrong paper to be automatically selected and may prevent printing or cause misfeeds.

6 Changing the paper size in paper tray 3 is now complete.

2-3