MISFEED REMOVAL
■Misfeed in the tray 5
1 Open the side cover.
2 Remove the misfed paper.
Be careful not to tear the misfed paper during removal.
3 Gently close the side cover.
4 Close the bypass tray.
5 Open the top cover of tray 5.
6 Open the top cover and remove the misfed paper.
After removing the misfed paper, close the top cover.
7 Remove tray 1 - tray 2.
Grasp the finger hold and gently open the unit. Pull the tray all the way out until it stops.
NOTE
If a misfeed occurs in the following situation, push tray 1 - tray 2 back in to close it and then pull the tray out again:
●A misfeed occurs during printing from tray 5 while paper is being loaded in tray 1 or tray 2.
8 Remove the misfed paper.
Check | the | paper | |
transfer unit | inside | the | |
tray and | remove | any | |
misfed paper. |
|
| |
9 Gently close paper tray 1 - tray 2.
Push the tray all the way back in.
Make sure that the misfeed message no longer appears (the normal message display should appear).