REC LL
A JOB PROGRAM HAS BEEN ALREADY STORED IN THIS LOCATION.

STORING, USING AND DELETING JOB PROGRAMS

Calling up a job program

1 Press the [#/P] key.

2 Touch the number key of the desired job program.

JOB PROGRAMS

The

screen

PRESS PROGRAM NUMBER.

automatically closes and

the job program is called

 

 

up. A number key that

 

does not have a job

RECALL

program

cannot be

 

 

selected.

3 Set the number of copies if needed and then press the [START] key.

Copying will begin using the settings of the job program.

Deleting a stored job program

1 Press the [#/P] key.

2 Touch the [STORE/DELETE] key.

4 Touch the [DELETE] key.

The selected program is deleted and you return to the screen of step 3.

CANCEL DELETE STORE To return to the screen STORE/DELETE of step 3 without deleting the job program, touch the [CANCEL] key. In both cases, touch the

[EXIT] key on the screen displayed in the screen of step 3 to exit the job program mode.

NUMBER.

RECALLSTORE/DELETE

3 Select a storage register number of the program to be deleted.

 

 

 

If a number key for which

 

 

EXIT

 

 

 

 

 

 

 

 

no

job program

has

 

 

 

been stored is selected,

 

 

 

the screen will change to

 

 

 

the screen of step 4 on

 

 

 

the

previous page

(for

STORE/DELETE

 

 

 

 

 

 

 

storing a job program).

NOTE

If overwriting of programmed copy settings has been prohibited in the key operator programs, you will not be able to clear a job program. (See page 15 of the key operator's guide.)

5-32