SPECIAL MODES
Margin shiftThe margin shift function will automatically shift the text or image on the copy paper approximately 1/2" (10 mm) in its initial setting.
This function is convenient when stapling or binding copies with a string.
NOTE
The initial setting for the margin width can be changed in the key operator programs to any value from 0 to 1" (0 to 20 mm).. (Page 14 of the Key operator's guide)
|
|
|
| ●The shift direction can be selected from right or left | ||||||
Original | Image shifted | Image shifted | shift as shown in the illustration. | |||||||
|
| to the right | to the left |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
MarginMargin
Original
Image shifted | Image shifted |
to the right | to the left |
Or | 5 |
| |
Margin | Margin |
To display the special modes screen...
3 Set the shift amount as needed and touch the [OK] key.
See "General procedure for using special functions" on page
1 Touch the [MARGIN SHIFT] key on the special modes screen.
The margin shift setting
SPECIAL MODES | screen will appear. | |
| ||
MARGIN SHIFT | The | margin shift icon |
ERASE | ) will also appear in | |
| ( | |
| OK |
CANCEL | OK |
SIDE 1 | SIDE 2 |
1/2 inch(0 1) | 1/2 inch(0 1) |
Use the 
and the 
keys to set the shift
amount. The shift amount can be set from 0" to 1" in 1/8" (0 to 20
mm in 1 mm) increments.
PAMPHLET COPY | JOB | the upper | left of | the | |
BUILD | screen to | indicate | that | ||
| |||||
|
|
the function is turned on.
2 Select the shift direction.
Touch a shift direction
RIGHT LEFT key to select right or left. The selected key will be highlighted.
4 Touch the [OK] key on the special modes screen.
You will return to the main screen of copy mode.
About the steps that follow
If an automatic document feeder is being used, see pages
To cancel the margin shift function, touch the [CANCEL] key on the margin shift setting screen.