PLAIN
PLAIN
81/2x11
PLAIN
READY TO SCAN FOR COPY.
1. 81/2x11 2. 81/2x11

NORMAL COPYING

Copying from the document glass

When copying originals which cannot be fed from the automatic document feeder such as thick originals, open the document cover and copy the originals from the document glass.

■1-sided copies of 1-sided originals

OriginalCopy

1 Place the original on the document glass. (pages 4-3to 4-6)

Document glass scale

Document glass scale

mark

mark

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8½x11

 

 

 

 

 

8½x14

 

 

 

 

 

or A4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

or B4

 

 

 

 

 

 

 

 

 

 

8½x11 or A4

11x17 or A3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

●Align the corner of the original with the tip of the

arrow mark on the document glass scale.

●Place the original in the appropriate position for its size as shown above.

2 Ensure that the 1-sided to 1-sided copy mode is selected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The one-sided to

one-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ORIGINAL

 

 

 

 

 

 

 

 

 

 

 

 

81/2x11

 

 

 

 

 

 

 

 

sided mode is selected

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

22

 

 

 

 

 

 

 

 

 

 

 

when no icon for a two-

 

 

 

 

11

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

81/2x11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

sided mode appears in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the dashed area on the

 

1.

 

 

 

2.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.

 

81/2x11

 

 

 

81/2x11

 

81/2x11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

display. If an

icon

 

3.

 

8

1/2x14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.11x17

appears, perform steps

3 to 5 on page 4-7 and then go to step 3.

3 Ensure that paper of the same size as the original is automatically selected*.

 

 

 

 

 

 

 

 

 

 

 

 

 

The selected tray will be

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EXPOSURE

 

 

 

 

 

 

 

 

 

highlighted

or

the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

message "LOAD xxxxxx

 

 

AUTO

 

 

81/2x11

4

 

 

 

 

 

 

PAPER." will appear. If

PAPER SELECT

 

 

the

message

appears,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

load

paper in

a

paper

 

 

 

 

100%

 

 

 

 

 

 

 

 

 

 

 

 

tray

with paper

of the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

required size.

Even if the message above is displayed, copying can be performed onto the currently selected paper.

*The following requirements must be satisfied. Originals of a standard size (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R or 5-1/2" x 8-1/2"R (A3, B4, A4, A4R, B5, B5R or A5)) are set and the auto paper select function is enabled.

If originals of a size other than the sizes above are to be copied, manually select the desired paper

3.

81/2x14

PLAIN

5. 81/2x11

size

by

touching

the

 

 

 

 

 

 

4.

11x17

 

PLAIN

 

PLAIN

[PAPER

SELECT]

key

 

 

 

 

 

 

 

 

 

 

 

 

and

then

touching

the

 

desired paper size selection key.

 

 

The selected key will be highlighted and the paper selection screen will close. To close the paper selection screen without making a selection, touch the [PAPER SELECT] key.

4-11