Touch the [AUTO IMAGE] key. 5.81/2 x11
AUTO
IMAGE
FILE
QUICK FILE

REDUCTION/ENLARGEMENT/ZOOM

Reduction and enlargement ratios can be selected automatically or manually.

●Automatic selection: Auto image (see below)

●Manual selection: Preset copy ratios/zoom (see page 4-16)

Automatic selection (auto image)

The reduction or enlargement ratio will be selected automatically based on the original size and the selected paper size.

1 Place the original in the document feeder tray or on the document glass. (pages 4-3to 4-6)

The detected original size will be displayed.

NOTE

Automatic ratio adjustment can only be used for the following original and paper sizes. It cannot be used for other sizes. However, in the case of non-standard original and paper sizes, the sizes can be entered to make automatic ratio adjustment possible for those sizes.

Original sizes:Standard sizes (see "Original size detection function" on page 4-3.)

Paper size: 11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8- 1/2" x 11"R, or 5-1/2" x 8-1/2"R (A3, B4, A4, A4R, B5, B5R, or A5R)

NOTE

If the message "ROTATE ORIGINAL FROM TO " is displayed, change the orientation of the original as indicated in the message. When the message above is displayed, copying can be done without changing the orientation, but the image will

not fit the paper correctly.

4 Use the numeric keys to set the desired number of copies.

Up to 999 can be set.

If you are only making a

single copy, the copy

can be made with the 4

copy number display

showing "0".

Use the [C] (clear) key to

cancel an entry if a mistake has been made.

2 Touch the [PAPER SELECT] key and then select the desired paper size.

 

 

 

 

 

 

 

 

 

The selected paper size

READY TO SCAN FOR COPY.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

key

is highlighted and

1. 81/2x11

2. 81/2x11

 

 

 

 

 

the

paper selection

 

 

 

81/2x11

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAIN

 

 

PLAIN

 

 

 

PLAIN

 

screen closes.

 

 

 

 

 

 

 

 

 

 

 

3.

81/2x11

 

HEAVY PAPER

 

5. 81/2x11

 

 

 

4.

11x17

 

 

 

 

 

 

 

 

 

 

 

 

PLAIN

 

 

 

PLAIN

 

 

 

NOTE

If paper of the desired size is not loaded in any tray, load paper of the required size in a paper tray or the bypass tray. (See "Setting the paper type and paper size" on page 2-10.)

3

 

 

 

 

 

 

 

The [AUTO IMAGE] key

 

 

PAPER SELECT

 

 

will

be highlighted

and

 

 

 

 

 

 

 

O

 

 

 

 

 

 

 

 

 

 

 

 

the

best reduction

or

 

 

 

129%

 

 

GE

 

 

 

 

 

 

 

 

 

 

 

enlargement ratio for the

 

 

COPY RATIO

 

 

 

 

 

original size and

the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

selected paper size will

 

 

 

 

 

 

 

be

selected

and

 

displayed in the copy ratio display.

 

5 If needed, touch the [FILE] key or the [QUICK FILE] key.

Either key can be touched to store the scanned document image on the machine's hard disk. The stored image can be re-

used later.

For more information on this function, see "Document filing function" in chapter 7.

If the [FILE] key is grayed out, only the [QUICK FILE] key can be selected. When you touch the [QUICK FILE] key, a message asking you to confirm the save will appear. Touch the [OK] key in the message screen and go to the next step.

If you wish to cancel the save, touch the [QUICK FILE] key after touching the [OK] key so that the [QUICK FILE] key is no longer highlighted.

6 Press the [START] key.

If you placed the original on the document glass, set the output mode to

"Sort", and pressed the

[START] key, you must touch the [READ-END] key after all pages of the

original have been scanned. (Step 8 on page 4-12)

To cancel the auto image mode, touch the [CA] key.

4-15