REDUCTION/ENLARGEMENT/ZOOM
The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed separately. The ratios can set from 25% to 400% in increments of 1%.
Example: Selecting 100% for the length and 50% for the width
OriginalCopy
1 Place the original in the document feeder tray or on the document glass. (pages
NOTE
When the original is placed in the document feeder, the ratio can be set from 25% to 200%.
2 Touch the [COPY RATIO] key.
5 Use the reduction, enlargement, and ZOOM ([
], [
]) keys to change the copy ratio in the horizontal (X) direction.
|
| Y |
| 1 | A fixed ratio key will not | ||
64% |
|
| |||||
|
| ||||||
|
|
|
|
| become | highlighted | |
ZOOM | when touched. | |
50% | ||
| ||
XY ZOOM |
|
PAPER SELECT
100% COPY RATIO
3 Touch the [XY ZOOM] key.
X50
Y100
ZOOM
to touch the [
]/[ automatically. After change rapidly.)
Zoom ratios: Any ratio from 25% to 400% can be set in 1% increments.
Touch the [
] key to increase the ratio, or the
[
] key to decrease the ratio. (If you continue ] key, the ratio will change
3 seconds, the ratio will
XY ZOOM | MENU |
NOTES
● Touch a reduction or enlargement key to set the | ||||
approximate ratio, then | touch the [ |
| ] key to | |
| ||||
increase the ratio or the [ |
| ] key to decrease the | ||
| ||||
ratio. |
|
|
|
|
● Automatic changing of the ratio when a zoom key | ||||
4 Touch the [X] key.
X100 Y 100
ZOOM
The initial state of the [X]
key is selected (highlighted), so this step normally is not necessary. Touch the
[X]key only if it is not highlighted yet.
is continuously touched can be disabled in the key |
operator programs (see "Key operation setting |
(prohibit key repeat)” on page 10 of the key |
operator’s guide). |
6 Touch the [Y] key.
X50
Y100
ZOOM