TROUBLESHOOTING
Problem |
|
| Check | Solution or cause | ||
|
|
|
|
|
| |
|
|
|
| Is paper other than SHARP- | Use | |
|
|
|
| recommended paper being used? |
| |
|
|
|
|
|
| |
|
|
|
| Is paper size or weight out of the | Use paper in the allowable range. | |
Printed | paper | is |
| allowable range? |
| |
|
| Be sure to store paper in the wrapper in a dry | ||||
wrinkled | or | the |
| |||
| location and do not store paper in a location that is | |||||
image | rubs | off |
| |||
| ●humid | |||||
easily. |
|
|
|
| ||
|
|
| Paper damp? | ●at a high temperature or an extremely low | ||
|
|
|
| |||
|
|
|
|
| temperature | |
|
|
|
|
| ●exposed to direct sunlight | |
|
|
|
|
| ●dusty. | |
|
|
| ||||
The contrast on the |
| Adjust the screen contrast using "DISPLAY | ||||
touch panel is | too | Is LCD contrast properly adjusted? | CONTRAST" in "DEFAULT SETTINGS" of the | |||
high or too low. |
|
|
| custom settings. (Page | ||
|
|
|
|
|
| |
|
|
|
|
| Load paper in the tray with the print side face up. | |
|
|
|
|
| However, if the paper type is | |
Printing takes place | The paper is loaded in the tray with the | "LETTER HEAD", load the paper with the print | ||||
print side face down*. | side face down*. | |||||
on the wrong side of | * Face up if the paper type is "PRE- | * If the | ||||
the paper. |
|
| ||||
|
| PRINTED" or "LETTER HEAD". | using "DISABLING OF DUPLEX" in the key | |||
|
|
|
| |||
|
|
|
|
| operator programs (page 11 of the Key | |
|
|
|
|
| operator's guide), load the paper face up. | |
|
|
|
|
|
| |
|
|
|
|
| If the original image overlaps the punch holes, | |
Marks | appear | at |
| marks will appear at the position of the holes on | ||
| the back of the paper after | |||||
regular intervals on | Paper with punch holes is being used. | |||||
on the front and back of the paper after two- | ||||||
printed pages. |
|
|
| |||
|
|
| sided printing. Make sure that the original image | |||
|
|
|
|
| ||
|
|
|
|
| does not overlap the punch holes. | |
|
|
|
|
|
|