Sharp manual ■[Print]

CALLING UP AND USING A FILE

5 Touch the key of the operation that you wish to perform.

(1)			(2)			(3)
JOB SETTINGS									CANCEL
	Basic specifications				Yamada Taro		81/2"x11"
	SELECT THE JOB.
		PRINT			SEND			PROPERTY
								CHANGE
		MOVE		DELETE				DETAIL
(4)			(5)			(6)

(1)[PRINT] key (see below)

(2)[SEND] key (see page 7-17)

(3)[PROPERTY CHANGE] key (see page 7-18)

(4)[MOVE] key (see page 7-19)

(5)[DELETE] key (see page 7-19)

(6)[DETAIL] key (see page 7-19)

The setting screen of the selected operation appears. See the indicated page.

■[Print]

A saved file can be printed.

The screen below appears when the [PRINT] key is selected in the operation selection screen. To begin printing, touch the [PRINT] ( 7 ) key. Printing settings can be selected in this screen before printing. The settings that were in effect when the file was saved appear initially. The settings can be changed as needed.

NOTES

●When print settings are changed with this procedure, only the value for the number of copies is overwritten.

●The printing speed will be slower for image files saved using certain resolution settings. (See page 7-28.)

JOB SETTINGS / PRINT									CANCEL
		Basic specifications				Yamada Taro		81/2x11
		AUTO
			NUMBER OF PRINTS
	PAPER SELECT
							PRINT AND DELETE THE DATA
		OUTPUT			(1~999)
				1
		2-SIDED
							PRINT AND SAVE THE DATA
	TANDEM PRINT

1[PAPER SELECT] key

Use this key to set the paper size.

2[OUTPUT] key

Use this key to select sort, group or staple sort functions, and to select the output tray.

3[2-SIDED] key

When performing two-sided printing, use this key to select the orientation of the image on the back side of the paper. To have the front and back images oriented in the same direction, touch the [2- SIDED BOOKLET] key. To have the front and back images oriented opposite to each other, touch the [2-SIDED TABLET] key. Note that the size and orientation of the saved image may cause these keys to have the opposite effect. If neither key is selected, one-sided printing will take place.

4[TANDEM PRINT] key

If the conditions for tandem printing are met (page 5-9), touch this key to enable tandem printing. See page 5-9 for more information.

5[NUMBER OF PRINTS] setting key Use this key to set the number of copies.

6[PRINT AND DELETE THE DATA] key

Touch this key to print a file and then have it automatically deleted.

7[PRINT AND SAVE THE DATA] key

Touch this key to print a file. The file will not be automatically deleted after printing.

7-16