NORMAL COPYING
4 Select9.) the desired output mode. (page 4-
7 Press the [START] key.
OUTPUT
FILE
Group mode is the default mode.
To select sort mode, touch the [OUTPUT] key, touch the [SORT] key in the screen that appears, and then touch the [OK] key.
Replace the original with the next original and press the [START] key. Repeat this operation until all originals have been scanned.
If you selected "Sort" for the output mode in step 4 and pressed the [START] key, it is necessary to touch the [READ- END] key.
5 Use the numeric keys to set the desired number of copies.
Up to 999 can be set.
If you are only making a
single copy, the copy can be made with the copy number display
showing "0".
Use the [C] (clear) key to
cancel an entry if a mistake has been made.
6 If needed, touch the [FILE] key or the [QUICK FILE] key.
Either key can be touched to store the scanned document image on the machine's hard disk. The stored image can be
later.
For more information on this function, see "Document filing function" in chapter 7.
If the [FILE] key is grayed out, only the [QUICK FILE] key can be selected.
When you touch the [QUICK FILE] key, a message asking you to confirm the save will appear. Touch the [OK] key in the message screen and go to the next step.
If you wish to cancel the save, touch the [QUICK FILE] key after touching the [OK] key so that the [QUICK FILE] key is no longer highlighted.
8 Touch the
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS
To cancel copying...
To cancel a copy job in progress, press the [CA] key. A confirmation message will appear. Touch the [YES] key to cancel copying.