Sharp manual Card shot

SPECIAL MODES

Card shot

When copying a card, this function allows you to combine the front and back sides on a single sheet of paper.

Original					Copy
	CARD			CARD
	Front of						CARD
		card
	Back of
		card				Example:
			Example:
			Portrait			Landscape
			8-1/2" (A4) size			8-1/2" (A4) size

●Copying is only possible on standard size paper.

●A copy ratio cannot be selected when using this function.

●The image cannot be rotated when using this function.

1 Touch the [PAPER SELECT] key and then select the desired paper size.

								The selected paper size
READY TO SCAN FOR COPY.
								key	is highlighted and
1. 81/2x11		2. 81/2x11						the	paper selection
							81/2x11
	PLAIN			PLAIN		PLAIN		screen closes.
3.	81/2x11		HEAVY PAPER		5. 81/2x11
4.	11x17
				PLAIN		PLAIN

NOTE

If paper of the desired size is not loaded in any tray, load paper of the required size in a paper tray or the bypass tray. (See "Setting the paper type and paper size" on page 2-10.)

To display the special modes screen...

See "General procedure for using special functions" on page 5-2.

2 Touch the [CARD SHOT] key in the special modes screen (2nd screen).

3 Enter the X dimension (width) and Y dimension (length) of the original with the keys.

CANCEL OK

SIZE RESET

FIT TO

PAGE

●X (width) is initially selected. Enter X and then touch the Y () key to enter Y.

●To return the X and Y values to the initial settings configured in the key operator programs, touch the [SIZE RESET] key. ("CARD SHOT SETTINGS" on page 14 of the key operator's guide).

●To have the images enlarged or reduced by a suitable ratio based on the entered original size so that the front and back sides fit into the selected paper size, touch the [FIT TO PAGE] key.

TRANSPARENCY	MULTI SHOT
INSERTS
TAB COPY	CARD SHOT

The CARD SHOT setting screen will appear. A card shot icon ( , etc.) will also appear in the upper left corner of the screen to

indicate that the function is turned on.

5-28