ESC / P2 Commands Epson LQ-2550 emulation
Programmer Reference Guide U26169-J-Z716-1-7600
© Siemens Nixdorf Informationssysteme AG 1995 Pfad: D:\SNI\Mackwitz\u26169\o26169e\26169e.k05
Assign character table
p1 = 3
p2 = 0
p3Character table, selected via p4 and p5
p4 p
5character table
0 0 : Kursiv
1 0: PC 437 (USA)
3 0: PC 850 (Multilingual)
7 0: PC 860 (Portugal)
8 0 PC 863 (French-Canada)
9 0 PC 865 (Norway)
44 0 PC 858
p4 and p5 are Decimal-characters
Four character tables can be assigned:
0 ≤ p3 ≤ 3 or 48 ≤ p3 ≤ 51
The command select character table will activate the assigned character table.
Select character table
p1 = 0, 1, 2, 3, “0”, “1”, “2” oder “3”
This command selects one of the four character tables which are assigned by the command
assign character table.
Control sequence Hexadecimal Decimal
ESC ( t p1 p2 p3 p4 p51B 28 74 p1 p2 p3 p4 p527 40 116 p1 p2 p3 p4
range: 0, 1, 2, 3, “0”, “1”, “2” oder “3”
Control sequence Hexadecimal Decimal
ESC t p11B 74 p1 27 116 p1