MSI Mod 10/10 | Barcodes |
The control characters are coded as follows:
–($) hexadecimal: 67
–(%) hexadecimal: 68
–(/) hexadecimal: 69
–(*) hexadecimal: 6A
i
The control characters are printed in plain text within a closed circle.
MSI Mod 10/10
The character complement of the MSI Mod 10/10 code comprises:
–10 digits: 0 1 2 3 4 5 6 7 8 9
– | 1 start character: | : | (X’3A in ISO |
– | 1 stop character: | ; | (X’3B in ISO |
The number of characters is variable. The start/stop characters are programmed with the characters : and ;.
In the plain text line, these characters are printed for start/stop.
A check digit is required and must be programmed in the application (and must be modulo 10 from a checksum generated in several stages).
The ratio of wide to narrow elements is fixed and is always 2 : 1.
The blank zone before and after the barcode symbol should be at least 10 times the width of a narrow element.
Programmer Reference Guide |
