Print carriage movements Epson LQ-2550 emulation
Programmer Reference Guide U26169-J-Z716-1-7600
© Siemens Nixdorf Informationssysteme AG 1995 Pfad: D:\SNI\Mackwitz\u26169\o26169e\26169e.k05
Print carriage movements
The following commands affect the print carriage movements:
●Carriage return
●Space
●Backspace
●Set 10 cpi
●Set 12 cpi
●Set 15 cpi
●Set/reset proportional spacing mode
●Set character spacing mode
●Absolute horizontal tabulation
●Relative horizontal tabulation
●Set horizontal tab stops
●Horizontal tabulation
●Set print direction (bidirectional or unidirectional)
●Set unidirectional print mode for one line
●Select text alignment
Carriage return The print carriage moves to the beginning of the line (left margin). The character following
CR is printed as the first character of the line.
A line feed may be performed in addition to the carriage return de pending on the
menu setting. When writing new application programs, take care to terminate each
line with LF and CR.
Control character Hexadecimal Decimal
CR 0D 13
i