Siemens 9016, 9014, 9015 E manual Reference table for check digit calculation

Code 93 Barcodes

In the plain text line, the special characters [ ] are printed for start/stop. All characters including the start, stop, control and check characters are also printed in the plain text line.

The symbol layout is not self-checking. Two check digits, C and K, are required and must be programmed in the application. The modulo 47 check digit layout is for the check digit C with a weighting of 1 to 10, for the check digit K with a weighting of 1 to 15.

The barcode height should be 15% of the barcode length or 0.25 inch, whichever is greater.

The blank zone before and after the barcode symbol should be at least 10 times the width of a narrow element.

Reference table for check digit calculation:

0	1	2	3	4	5	6	7	8	9	A	B	C	D	E	F	G	H	I	J	K	L
0	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21
M	N	O	P	Q	R	S	T	U	V	W	X	Y	Z	-	.	Sp	$	/	+	%	($)
22	23	24	25	26	27	28	29	30	31	32	33	34	35	36	37	38	39	40	41	42	43
(%)	(/)	(+)
44	45	46

Programmer Reference Guide U26169-J-Z716-1-7600