Font designIBM Proprinter emulation
Set expanded mode for one line
Control sequence | Hexadecimal | Decimal |
|
|
|
SO | 0E | 14 |
|
|
|
The characters in one line are printed with double width.
The function is terminated by LF, CR, VT, FF, DC4 and ESC W 0.
Set/reset expanded mode
Control sequence | Hexadecimal | Decimal |
|
|
|
ESC W p1 | 1B 57 p1 | 27 87 p1 |
Characters are printed with double width when the expanded mode is active.
p1 | sets/resets the expanded mode | |
Parameter values: |
| |
|
|
|
Dec | Hex | Meaning |
000 Reset expanded mode
101 Set expanded mode
4830 Reset expanded mode
4931 Set expanded mode
Reset expanded mode
Control sequence | Hexadecimal | Decimal |
|
|
|
DC4 | 14 | 20 |
|
|
|
i
This function only resets expanded mode set with the SO command.
Programmer Reference Guide |
