Siemens 9014, 9015, 9015 E, 9016 Set n/360 inch line spacing mode , Line feed (LF) , Form feed (FF)

Forms transport Epson LQ-2550 emulation
Programmer Reference Guide U26169-J-Z716-1-7600
© Siemens Nixdorf Informationssysteme AG 1995 Pfad: D:\SNI\Mackwitz\u26169\o26169e\26169e.k05
Set n/360 inch line spacing mode
The line spacing is set to n/360 inch.
p1 Line spacing in 1/360 inch increments
Line feed (LF)
The line feed is performed using the current line spacing. The co ntents of the line buffer are
printed.
The expanded mode for one line is terminated by this control character.
A carriage return is also performed depending on the me nu setting.
Form feed (FF)
The paper is advanced to the next top of form position. The contents of the line buffer are
printed.
The expanded mode for one line is terminated by this control character.
A carriage return is also performed depending on the me nu setting.
Control sequence Hexadecimal Decimal
ESC + p11B 2B p127 43 p1
Range: X’00 ≤ p1 ≤ X’FF
Control character Hexadecimal Decimal
LF 0A 10
Control character Hexadecimal Decimal
FF 0C 12
i
i