Siemens 9016, 9014, 9015 E manual Bitmap graphics, Select graphics mode

Bitmap graphics IBM Proprinter emulation

Bitmap graphics

The following commands are available:

●Select graphics mode

●Select single dot-density graphics mode

●Select double dot-density graphics mode

●Select double dot-density and double-speed graphics mode

●Select quadruple dot-density graphics mode

●Select graphics mode (expanded)

Select graphics mode

Control sequence	Hexadecimal	Decimal
ESC * p1 p2 p3 data	1B 2A p1 p2 p3 data	27 42 p1 p2 p3 data

The graphics data is transferred in columns. A column contains either 8 or 24 individual vertical dots.

Each graphics line begins with this command, which defines the graphics mode (vertical and horizontal resolution). A defined number of pixel data items follows. The number of columns is defined by parameters p2 and p3.

Data

B7 B6 B5 B4 B3 B2 B1 B0

1/72 inch

Figure 1: Vertical dot density 72 dpi

Programmer Reference Guide U26169-J-Z716-1-7600