
Making Calls – Basic Functions
Step by Step |
|
Speaker |
|
| t |
| or |
Release |
|
Redial |
|
Redial |
|
Next? | : |
Next? | : |
> Call? | : |
18 |
|
The called party does not answer or is busy:
Press the key. The LED goes out.
Your system may also be programmed so that you have to press the Internal key before you dial an internal number.
To call an external party, you have to enter an ex- ternal code before dialing the party’s telephone number (Prime Line is not active; contact your service personnel).
Ending the call
Replace the handset.
Press the key.
Redialing a Number
The last three external telephone numbers dialed are stored automatically.
You can redial them simply by pressing a key.
The station number appears on your screen for two sec- onds and is then dialed.
Press the key once to dial the number last dialed.
Press the key twice to dial the next to the last number dialed.
Press the key three times to dial the
Displaying and dialing saved station numbers
Press the key.
Press the "OK" dialog key within two seconds to confirm your choice.
The next stored number is displayed. Press the "OK" di- alog key to confirm four selection.
Select and confirm.
If this feature is configured (contact your service personnel), account codes entered are also saved Æ Page 73.