Using Other Functions

Step by Step

o

o

r

Using System Functions from the Outside (DISA: Direct Inward System Access)

If this function has been configured (contact your ser- vice personnel), you can set up external outgoing calls from outside the system, just like an internal user. You can also activate and deactivate the following functions in your system:

Reset services and functions, code: #0 Æ Page 86

Call forwarding, code: *1/#1 Æ Page 22

Lock and unlock all phones, code: *66/#66 Æ Page 78

Save PIN,

code: *93 Æ Page 80

Send a message,

code: *68/#68 Æ Page 81

Leave an advisory message, code: *69/#69 Æ Page 83

Group ringing, code: *81/#81 Æ Page 95

Group call, code: *85/#85 Æ Page 95

Suppress caller ID,

code: *86/#86 Æ Page 75

Waiting tone, code: *87/#87 Æ Page 52

Open door, code: *61 Æ Page 36

Door opener on/off, code: *89/#89 Æ Page 37

Control relay, code: *90/#90 Æ Page 93

Do not disturb, code: *97/#97 Æ Page 74

Ringer cutoff function, code: *98/#98 Æ Page 74

Speed-dialing, code: *7 Æ Page 41

Associated service, code: *83 Æ Page 87

Precondition: You have a telephone that uses tone di- aling (DTMF dialing) or you can switch your telephone to tone dialing. The telephone is not connected to the system.

Set up a call to the system. Enter the station number (contact your service personnel).

Wait for a continuous tone (if necessary switch the tele- phone to tone dialing), then enter the internal number that has been assigned to you and the associated PIN.

Enter the code (necessary only if programmed in the system).

88

Page 88
Image 88
Siemens HIPATH 5000, HIPATH 2000, HIPATH 3000 operating instructions Call forwarding, code *1/#1 Æ