Making Calls – Convenience Functions
Step by Step |
|
Program/Service |
|
> *41=Temporary MSN? | : |
| or |
qhe | |
| o |
| o |
| n |
| n |
Assigning a Station Number (Not for U.S.)
If this function has been configured (contact your ser- vice personnel), you can selectively assign a specific number (DID number) to your telephone before making an external call. The assigned number then appears on the called party’s display.
Press the key. The LED lights up.
Select and confirm1.
Enter the code.
Enter the DID number you wish to use.
Dial the external number.
Associated Dialing/Dialing Aid
If this function has been configured (contact your ser- vice personnel), you can use a dialing aid to dial num- bers and set up calls for your telephone.
The operating procedure depends on whether the dial- ing aid is connected to the S0 bus or the a/b (T/R) port.
You can also use your system telephone as a dialing aid for other telephones.
Dialing aid on the S0 bus:
On the PC, select a destination and start dialing.
The speaker on your telephone is switched on. Lift the handset when the other party answers.
Dialing aid at the a/b (T/R) port:
On the PC select a destination and start dialing.
"Lift the handset" appears on the PC screen.
Lift the handset.
[1] ”Different Displays (HiPath 4000 Environment)” Æ Page 117
49
