Setting Use Notes
System
Functionality
Set to Presenteror Whiteboard
mode.
Thedefault is Presenter mode.In
Presentermode, the pointerfollows
thepen as you point it at t heprojected
imageand move it.
In Whiteboardmode, the pointeronly
moves whenyou press the pen tip
againstthe projection surface, or you
presst heleft-clic k button ont hepen.
Battery Capacity D isplays the interactive penbattery
level.
In orderfor the battery level, RF
strengthand Pen version, to display;
theinteractive pen’s status li ghtmust
beblinking green.Itblinks greenunder
thef ollowingconditions:
lThepen is turned on andpointed
at the projectedimage (nott he
SMARTlogoscreen).
lThepen isn’t paired with a
differentinteractive projector.
RF Strength Displays the strength of the RF
connectionbetween the interactive
penand the projector.
PenVersion Dis plays the firmwarev ersionof the
interactivepen.
Networkmenu
Network andVGA
Out
Activates the projector’s VGAOutand
RJ45 connectorand network features.
Thedefault is off.
Status Displaysthe current network status
(Connected,Disconnectedor Off).
IP Address Displays the projector’s currentI P
addressin values between 0.0.0.0 and
255.255.255.255.
Toc hangethe projector’sI P address,
uset heR S-232connector (see
Network controls on page70) or use a
DHCP server to assign a dynamic IP
address,and then set a static I P
addressusing the networkremote
management feature(see Remotely
managingyourinteractive projector on
page53).
SubnetMask Displays the projector’s subnetmask
numberin values between0.0.0.0 and
255.255.255.255.
CH A P T E R 3
Usingyour interactive projector
18