Control panel II
This menuenables you to managethe 3D features, USB s ourcecontrol, audio featuresand
interactivefeatures.
Submenu setting Description
3D on/off Turnsthe DLP Linktechnology 3D featureon oroff .
3D invert Selects the3D Invert setting (L R or R L).
3D format Displaysthe current3D format (Interleavedor Under-over).
USB1 source N/A
USB 2 source N/A
Linevolume Adjusts the projector’sline-input volumeamplification from
-20to 20.
Microphonevolume Adjusts the projector’s microphonevolume amplification
from0 to 40.
Mic attenuation Enablesor disables attenuationof themic rophoneinput.
System mute Mutes theprojector’s audio output.
Microphonemute Mutes themic rophoneoutput.
Microphoneoutputsw itch Setoutput to Line out + speaker,Lineout or Speaker.
System outputsw itch Set output to Line out + speaker,Lineout or Speaker.
Volumecontrol Adjusts the volume control.
Interactive Turnsinteractive features on or off.
Channel Autoallows the projectort o automaticallys elect the best
radiofrequency (RF)c hannel.Manual lets you select a
channelwithin the 2.4 GHz band.
Channelinformation Displays the RF channelthat the projectoris using and
allows you to set it.
System functionality Allows you to set the interactionmode to Presenteror
Whiteboard.
Network settings
This menuallows you to use or not use Dynamic H ost Control Protocol(DH CP) andto s et the
network-relatedaddressesand names whenD HCP is not used.
Submenu setting Description
DHCP Determinesif t heprojector’s IPaddress andother network settings
aredynamically assigned by a DHCPserver or manuallyset.
lOnallows thenetwork’s DHCP server to assign a dynamic IP
addressto the projector.
lOffallows you to manually set the projector’s IP address and
othernetwork settings.
CH A P T E R 7
Remotelymanaging your interactiveprojector
57