lTypec ommandsexactly as they appearin the left column of the tables, with the propervalue
orsett ingin t hecenter column.
NO T E S
lSenda command only after the projectorsends a command prompt.
lCommandsaren’t case sensitive.
lCheck your entriescarefully before enteringyour commands.
lPress ENTER after typing each command.
lAfter the projectorexecutes a command, it generatesa response.
lToprevent buffer overrun,don’t send anothercommand until you receive thenext command
prompt.
lTurnon the projectorso t hat the detailsin t hec ommandlists arecomplete.
Value-based command methods

Absolutevalues and adjustment values

Youcan use the command’s target rangeto set an absolute value for a commandor cause an
adjustmentto be made to the currentv alue.To create an adjustment command,add a plus (+) or
minus(-) symbol instead of the equal symbol (=) beforethe value changeyou want to enter.
All absolutevalues you enter must be within the command targetrange, and all adjustmentvalues
must equala number within the commandtarget range.
Seethe following examples for adjusting projectorbrightness.
>get brightness
brightness=55
>set brightness=65
brightness=65
>set brightness+5
brightness=70
CH A P T E R 8
Connectingyour room control system toyour intera ctiveprojector
62