NO T E
Someof t hesecommands are invalid with HDMI input and VGA video sources, and will returnthe
response“invalidcmd=[command]”.
Thesecommands inform you of the currentComposite video source settings.
Command Response
gets aturation saturation=[currentsaturation setting]
gett int t int=[currenttint setting]
gets harpness s harpness=[current sharpness setting]
Thesecommands control the appearance of your Compositev ideosource. See Value-based
commandmethods on page 62for sett ingabsolute and adjustmentc ommands.
Command Command targetrange Response
set saturation[v alue] =0 t o =100 saturation=[value]
set tint [value] =0 to =100 tint=[value]
set sharpness[v alue] =0 t o =31 sharpness=[value]
Audio controls
Thesecommands control your projector’sinternal audioamplifier, which affects soundpassed
throughthe projectorto your external audiosy stem (not included).Audio output controlsaren’t defined
by the videos ource.These settings are unavailablewhen the projectoris in Standbymode.
Thesecommands inform you of the currentaudio output settings.
Command Response
getv olume volume=[currentvolume setting]
getmute mute=[current mute setting]
getv olumecontrol volumecontrol=[current volumecontrol setting]
Thesecommands control your projector’saudio amplifiersett ings. See Value-basedcommand
methods onpage62 for setting absolute andadjustment commands.
Command Command targetrange Response
set volume [value] =-20to =20 volume=[value]
set mute [target] =on
=off
mute=[target]
set volumecontrol[target] =on
=off
volumecontrol=[target]
set micvolume [target] micvolume=[current]N o No
CH A P T E R 8
Connectingyour room control system toyour intera ctiveprojector
67