Submenu setting Description
IP Address Displays or allows youto set the projector’s IP addressin values
between0.0.0.0 and 255.255.255.255.
SubnetMask Displays or allows you to set t heprojector’s subnet mask numberin
valuesbetween 0.0.0.0 and 255.255.255.255.
Gateway Displays or allows you to set the projector’s default network gateway
inv aluesbetween 0.0.0.0 and 255.255.255.255.
DNS Displays orallows yout o set the projector’sI P addressfor your
network’s primarydomain nameserver in values between 0.0.0.0 and
255.255.255.255.
GroupName Dis plays or allows you to set the projector’s workgroupname
(maximum12 characters).
ProjectorName Displays or allows you to s et the projector’sname (maximum 12
characters).
Location D isplays or allows you to set the projector’s location (maximum16
characters).
Contact Displays or allows you to set the contact name or numberfor projector
support(maximum 16 characters).
SNMP Turnsthe Simple Network ManagementProtocol (SNMP) agent onor
off.
Read-OnlyCommunity Sets a passwordt hatis requiredfor each SNMP getrequest to
thedevice.
NO T E
Thedefault password for Read-OnlyCommunity is public.
Read/WriteC ommunity Sets a password that is requiredfor each SNMP set requestto the
device.
NO T E
Thedefault password for Read/Write Community is private.
TrapDestination Address Displays orallows y out o set the IP address of your network’s SNMP
TRAP managerin values between 0.0.0.0and 255.255.255.255.The
trapdestination addressis the IP address of the computerassigned to
handleunsolicited datageneratedby SNMP TRAP events generated
by theprojector, such aspower state changes, projectorfailure
modes,a lamp needingt o bereplaced or otherissues.
CH A P T E R 7
Remotelymanaging your interactiveprojector
58